ELSII-10HM

Item Number: 1023301311

Network Horn Speaker, 10W, Ethernet, Microphone

  • Zenitel Audio Presence - crystal clear audio
  • 10W Class D, built-in amplifier
  • Protected from dust and Water - IP66
  • 116 dB SPL (1m)
  • Ideal for Micro Zone PA and systems that require a limited number of speakers
  • Each speaker is individually addressable and monitored
  • ONVIF Compatible
  • Ideal for speakers installed in remote locations, e.g. roads and railways
  • Remote software upgrade and configuration
  • Relay output for remote control, e.g. doors, signal lamps, gates
  • Powered from the IP network cable using Power over Ethernet (PoE)
  • Ideal for Building Security, Infrastructure and Industrial projects
SIP
IC-Edge
alphacom_40x40 ICX-AlphaCom
EXIGO_40x40 Exigo
IP66 IP66
Audio
Automatic Volume Adjustment Automatic Volume
HD Voice HD Voice
Network

This IP speaker features a 10W Class D amplifier, powered over PoE. This means that the speaker is capable of delivering more than 116 dB, depending on the signal input from a single Ethernet cable. The Horn design give better directivity over that of a cabinet speaker, and ideal for more target audio messages, or installation in challenging acoustic environments where increased directivity is key to intelligible audio.

With IP, the system is able to monitor and address each speaker individually. By moving the amplifier from a central unit out to the speaker itself, the need for a central amplifier unit with conventional speaker loops is eliminated. This makes the system highly scalable, and adding another speaker is easy to do.

Whilst conventional speaker loops are not used, the speakers can still be divided into groups. These zones can now extend over networks or span the Internet. To provide maximum availability, the speaker comes with advanced supervision functions.

The built-in microphone enables intelligent features such as Self-checking, and Automatic Volume Control. It also enhances what is traditionally a broadcast-only medium adding Half Duplex speech, and Ambient Listen functions. Self-checking will detect whether there are any faults in the network or speaker electronics. The status of the speaker is reported to the central unit as well as to 3rd-party management systems using SNMP or Syslog. The speakers can also be discovered, receive messages, and use Talkback direct to a VMS over ONVIF.

The speaker has a built-in web interface for status information, control, and upgrade. It is easy to install and maintain. In addition, there are possibilities where broadcasts can be logged in detailed reports.

General
Internal speaker amplifier 10 W class D
Max. sound pressure level at 1 meter 116 dB
Dispersion (-6dB) 1kHz / 4kHz 140° / 40°
Directivity factor, Q 1,8
Codecs G.711, G.722
Frequency range, G.722 Codec 200 Hz – 7000 Hz
Mounting Bracket (included)
Weight 1.8 kg / 4 lbs
Material / Color ASA (plastic) / RAL 7035 (light grey)
Electronics cover material ASA (plastic)
Gasket material Silicone rubber
IP Rating IP66, tested according to EN 60529
ENVIRONMENT AND COMPLIANCES
Operating temperature range -40° to 70° C / -40° to 158 ° F
Storage temperature range -40° to 70° C / -40° to 158 ° F
Relative humidity < 95% not condensing
EMC CE and FCC Part 15
HARDWARE
Ethernet connector 1 x RJ 45
All other connectors Tool less, spring loaded, vibration proof terminals
General inputs and outputs 6 (configurable)
Outputs 12mA as LED drivers
Change-over relay (NO+NC+COM) Max: 250VAC/220VDC, 2A, 60W
Power options PoE
PoE (power over Ethernet) IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
Power consumption Idle 1.8W, max 12W (depending on volume)
Audio line out / induction loop signal 600 Ohm
NETWORKING AND PROTOCOLS
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, Unicast, Multicast, HTTPS, TFTP, RTP, DHCP, SNMPv2c, ONVIF, CCoIP® , NTP
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operation HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE™. Remote automatic software upgrade. Centralized monitoring
Advanced supervision functions E.g. network test, tone test, status reports
SIP support RFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info)
DTMF support RFC 2833, 2976 (SIP info)
OTHER SPECIFICATIONS
IP address information Speaks IP address after system boot
Country of manufacture Poland
Dimensions (HxWxD) 144 x 186 x 207 mm
Weight 1.65 kg
Encapsulation material ASA plastic
DIN-rail clips Wago 209 (included)
Boxed Weight 1.8 kg / 4 lbs
Box Dimensions (Width x Height x Depth) 250 x 210 x 170 mm

Polar plot

EMCG-1

Microphone for Network Loudspeakers

ELSII-10LHM

Network Long Horn Speaker, 10W, Ethernet, Microphone

Ceiling_speaker-ELSIR-10CM

ELSIR-10CM

Network Ceiling Speaker, 10W, Ethernet, Microphone

ELSII-10PM

Network Projector Speaker, 10W, Bi-Directional, Ethernet

ELSII-10WM

Network On-Wall Cabinet Speaker, 10W, Ethernet, Mic

Date Name Category Size Document
4.11.2022 A100K12150 IP Speaker Mounting Installation Manual Manual 5.55 MB Download
3.11.2022 ELSII-10 HM 1023301311 CAD 2D 1.9 MB Login to download
3.11.2022 A100K11591 Installation Kit Cat6a Connection Guide Manual 318.3 KB Download
3.11.2022 ELSII-10HM ES Datasheet 663.23 KB Download
3.11.2022 ELSII-10HM IP Druckkdammerlautsprecher DE Datasheet 1.01 MB Download