Skip to main content

ATLB

Item Number: 1009102000

Subscriber Line Board

  • Is used for 2-wire connection of telephones as stations in an AlphaCom system
  • Each board provides 6 telephone connections and 1 voice-switched conversation
  • 6 remote control outputs (software configurable activation)
  • Hotline function
  • DTMF dialing
  • R-button detection
  • Selectable -48V or -24V battery feed
  • 600 ohm or complex impedance hybrid balance
  • Line monitoring using resistor in parallel with phone
  • Hot plug in and out of the board
  • Red/green/amber LED indicates system status

This board contains circuitry for connection of 6 2-wire telephones as AlphaCom subscribers. The board also provides one measurement channel for voice switching control. It plugs into any position 1 - 23. When the hot-line function is activated for the station a preprogrammed number is dialed when the handset is lifted. When the handset is replaced, another number is dialed.

The board provides 6 remote control outputs that are software-controlled. The line monitoring reports errors on all subscriber lines. If the handset is left off for 1 hour (programmable timer) a line error is reported. The board can be plugged in/out while the exchange is running. A hot plug-in cable is needed for this purpose. The cable is included in the cable set for the exchange.

General
Order Number 1009102000
Operation Voltage 5, 15, 24, 32 V DC
Dimensions (W x H x D) 10 mm x 230 mm x 263 mm, 0.39” x 8.97” x 10.26” Double Extended Europe Format
S/N ratio (conversation) 45 dB
Input impedance 600 ohm
Frequency range conversation 300 - 3,400 Hz
Crosstalk at 1 kHz < -75 dB
Capacity for each ATLB board 6 subscribers
Duplex-controlled conversations 1 voice-switched conversation per board
Remote control outputs 5 V 2.2 Kohm
Cable type 1-pair twisted cable per station
Max. cable length to station 0.5 mm2: 6 km, 0.6 mm2: 8 km, 0.9 mm2: 10 km
Distortion < 2%
Indicator LED (red/green/amber)
ORDER NUMBER DESCRIPTION SHIP WEIGHT
1009102000 AlphaCom Subscriber Line Board for DTMF stations, ATLB 0.5 kg / 1.1 lb.
Supplementary equipment:
1009501031 1.5 m Flat Connection Cable with Filter Board
1009930202 Subscriber Connection Board, Krone terminals
1009910120 Distribution Field for Subscriber Connection Boards ATLB

No documents available for this product.