Skip to main content

BPF-660T-MED

Item Number: 2131000155

Ceiling speaker, 100V, IP54, 6W

  • 70V / 100V line
  • Tapping: 0,5W - 1,5W - 3W - 6W
  • MED approved
MED EU Certification icon MED Certification
IP66 40x40 ico IP54

Our new improved mounting system makes this the most flexible 6″ ceiling speaker DNH A/S has made. The hooks are changeable to set upside down, allowing up to 55 mm on the ceiling thickness. The easy mounted dust box has a M20 gland and a M20 blanking plug on the side as standard.

Installation, Operation and Maintenance Procedures

  • Install the ring into the cutout hole turning the crews connected to the three hooks, screw clockwise until the ring is fixed to the ceiling.
  • Open box by one screw, lead cable through cable gland, connect to terminal (70V or 100V) and select required tapping on transformer.
  • Screw box back into place with one screw.
  • Turn the grille gently clockwise within the ring until it stops.
  • Hooks can be mounted both ways, see drawing at top of the page.
  • For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated.
  • Do not open loudspeaker when energized.
  • This loudspeaker is supplied with two years warranty against defective workmanship.

 

General
Material/Colour PA-6 V0/ ABS / RAL9010
Mounting Hooks
Termination Spring clamp
Weight 1,3 kg
Max./min.amb.temp 90°C / -20°C
Rated power 6W
SPL 1W/1m 93 db
SPL Rated Power 100 db
Effective freq. Range 170 – 20000 Hz
Dispersion (-6dB) 1kHz / 4kHz 155° / 125° (baffle)
Size (Diam x D): 237 x 137 mm
Environmental Condition Protected

2131000105_Dim_Draw

No documents available for this product.