zenitel ecp-c1

ECP-C1

Item Number: 1008195005

Single Button Emergency Call Point with Built in AFIL Hearing Loop

  • Zenitel’s advanced IP audio processing technology
  • Built-in Audio Frequency hearing Loop (AFIL)
  • Rugged construction
  • Brushed stainless steel front plate and a painted stainless steel back box
  • Either surface or flush mounting
IK10 IK10
HD Voice HD Voice
Active Noise Cancelling Active Noise Cancelling
Open Duplex Open Duplex

The ECP-C1 Help point is an Emergency Call Point Intercom incorporating Zenitel’s advanced audio processing technology, and which is designed for use in applications such as for public transport infrastructure. The help point is operated to make a call to a configured Emergency Response Centre.by means of a single red coloured call button, labelled “Alarm”, and which is also identified by means of an alarm bell icon and Braille text which spells the text “ALARM”.

The ECP-C1 includes a built-in Audio Frequency hearing Loop (AFIL), and is an Internet Protocol (IP) help point which can be managed through the Zenitel ICX and Connect range of intercom management products. Use of standard Telephony audio Codecs plus the Session Initiation Protocol (SIP) also enables the ECP-C1 to be compatible with a wide range of commercial telephony systems and telephone Private Branch Exchange (PBX) products. The ECP-C1 only requires a single external connection due to the inclusion of a Power over Ethernet (PoE) power supply.

The ECP-C1’s rugged construction comprises of a self-coloured brushed stainless steel front plate and a painted stainless steel back box. The front panel is secured to the back box by means of six tamper resistant screws, with each order being supplied with a set of a standard format hex screwdriver bit which fits the front panel screws.

ORDER NUMBER DESCRIPTION SHIP WEIGHT
1008195005 ECP-C1, Single Button Emergency Call Point with Built in AFIL Hearing Loop 6.0 kg
HARDWARE
Ethernet connector 1x RJ45
Call Progress Indicator - Calling Green LED
Call Progress Indicator - In call Green LED
Call Progress Indicator - hearing Loop Active Green LED
Call Button Red with braille text
Mechanical
Dimensions (Assembled for Surface Mounting) 320.5mm (h) x 160.5mm (w) x 115mm (d)
Weight 5.5 kg
Material (Front Plate) Brushed Stainless Steel, 316
Material (Flush Mounting Adaptor Plate) Brushed Stainless Steel, 316
Material (Rear Enclosure) Painted Stainless Steel, 316
Gasket material Neoprene
Mounting Options Flush and Surface
Power Supply
Power over Ethernet POE+ (IEEE 802.3at standard)
Audio
Audio Quality (STI) 70dB > 0.8
Codecs G.711, G.722, G.729
Frequency Range (G.722) 200 Hz – 7000 Hz
Audio technology Modes: Full open duplex, switched open duplex
Adaptive jitter filter
Local tone generator
Sound Level Detection
Automatic gain control (microphone)
Speaker Amplifier Built in 10W Class D
NETWORKING AND PROTOCOLS
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP,
RTP, DHCP, SNMP, NTP
LAN protocols Network Access Control (IEEE 802.1x)
HTTP/HTTPS (Web configuration)
E.g. network test, tone test, status reports
Advanced supervision functions Network test, tone test, status reports
RFC 3261 (SIP base standard)
RFC 3515 (SIP refer)
RFC 2833 2976 (SIP info)
ENVIRONMENT AND COMPLIANCES
IP rating IP-65
IK rating IK-10. Limited to front plate when flush mounted. Based on the requirements from EN 62262.
Operating temperature range -25° to 65° C
Storage temperature range -25° to 70° C
Realative humidity < 90% not condensing
Compliances CE and UKCA
EMC CE and FCC Part 15
Country of Origin Denmark
AFIL Hearing Loop
Amplifier Built In
Loop Built In
Loop Max Output Current (sine) 3.1A RMS
Loop Impedance 0.3Ω to 1Ω, 1.3Ω reactive at 1.6kHz
Freq. Response 100Hz to 5kHz ±1.5dB
Metal Loss Correction 0dB to 3dB / octave boost
Zenitel ECP-c1 dimensions

 

Date Name Category Size Document
User Manual and Install Guide ECP-C1 v01 Manual 910.29 KB Download