ELSIR-10C

ELSIR-10C

Item Number: 1023300010

Network Ceiling Speaker, 10W, Ethernet

This Vingtor-Stentofon IP speaker features a 10W Class D amplifier, utilizing all the power that PoE is capable of. This means that the speaker is capable of delivering more than 100dB, depending on the signal input.

With IP, the system is able to monitor and address each speaker individually. By moving the amplifier from a central unit out to the speaker itself, the need for a central amplifier unit with conventional speaker loops is eliminated. This makes the system highly scalable, and adding another speaker is easy to do.

Even though conventional speaker loops are not used, the speakers can still be divided into groups. These zones can now extend over networks or span the Internet.

To provide maximum availability, the speaker comes with advanced supervision functions. The speaker line test will detect whether there are any faults in the network or speaker electronics. The status of the speaker is reported to the central unit as well as to 3rd-party management systems using SNMP or Syslog.

The speaker has a built-in web interface for status information, control, and upgrade. It is easy to install and maintain. In addition, there are possibilities where broadcasts can be logged in detailed reports.

See also: additional documentation on wiki.zenitel.com

General
Rated Impedance (speaker driver) 8 0hm
Rated power (speaker driver) 10W
Max. power (speaker driver) 15W
Max. SPL 1W / 1m (speaker driver) 97 dB
Effective frequency range (speaker driver) 250 - 10000 Hz
Codecs G.711, G.722
Frequency range, G.722 Codec 200 Hz – 7000 Hz
Internal speaker amplifier 10 W class D
Mounting Hooks / fasteners (included)
Weight 1.4 kg / 3 lbs
Material / Color Steel / RAL 9010 (white)
Electronics cover material ASA (plastic)
IP Grade IP-54, tested according to EN 60529
Dimensions (diameter x depth) 199 x 146 mm
ENVIRONMENT AND COMPLIANCES
Operating temperature range -40° to 70° C / -40° to 158 ° F
Storage temperature range -40° to 70° C / -40° to 158 ° F
Relative humidity < 95% not condensing
EMC CE and FCC Part 15
HARDWARE
Ethernet connector 1 x RJ 45
All other connectors Tool less, spring loaded, vibration proof terminals
General inputs and outputs 6 (configurable)
Outputs 12mA as LED drivers
Change-over relay (NO+NC+COM) Max: 250VAC/220VDC, 2A, 60W
Power options PoE and or external power supply
PoE (power over Ethernet) IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
External power supply 24 VDC (16 – 48 V)
Power consumption Idle 1.8W, max 12W (depending on volume)
Audio line out / induction loop signal 600 Ohm
NETWORKING AND PROTOCOLS
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, STENTOFON CCoIP® , NTP
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operation HTTP/HTTPS (Web configuration) DHCP and static IP + STENTOFON Pulse™. Remote automatic software upgrade. Centralized monitoring
Advanced supervision functions E.g. network test, tone test, status reports
SIP support RFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info)
DTMF support RFC 2833, 2976 (SIP info)
OTHER SPECIFICATIONS
System boot time Under 10 seconds
IP address information Speaks IP address after system boot (requires connected loudspeaker)
Country of manufacture Norway
Encapsulation material ASA plastic
DIN-rail clips Wago 209 (included)

ELSIR-10c

ENA2060-DC1

ENA2060-DC1

Exigo Network Amplifier with 2 60 W Amplifier Channels 110 V DC

Ceiling_speaker-ELSIR-10CM

ELSIR-10CM

Network Ceiling Speaker, 10W, Ethernet, Microphone

Date Name Category Size Document
16.05.2023 MD-SDoC-1023300010-IHM-8003-41773-50140 Declaration 72.17 KB Login to download
3.11.2022 A100K11591 Installation Kit Cat6a Connection Guide Manual 318.3 KB Download
14.11.2021 1023300010 ELSIR-10C Rev.01 CAD 2D 723.23 KB Login to download