Zenitel IP Speaker ZIPS-C.jpg

ZIPS-C | IP Ceiling Speaker

Item Number: 1023320011

Zenitel IP ceiling speaker

  • IP ceiling speaker
  • Zenitel Audio Presence - crystal clear audio
  • Steel fire dome
  • 105 dBA max SPL (1m)
  • Speaker as Microphone technology
  • Ideal for Micro Zone PA and systems that require a limited number of speakers
  • Each speaker is individually addressable and monitored
  • ONVIF Compatible
  • Ideal for speakers installed in remote locations, e.g. roads and railways
  • Remote software upgrade and configuration
  • Relay output for remote control, e.g. doors, signal lamps, gates
  • Powered from the IP network cable using Power over Ethernet (PoE)
SIP
IC-Edge
alphacom_40x40 ICX-AlphaCom
Automatic Volume Adjustment Automatic Volume
HD Voice HD Voice
Automatic Gain Control Automatic Gain Control
Network

The ZIPS IP ceiling speaker features a Class D amplifier with dynamic power handling, optimising its performance for both voice and multimedia signals. This enables the speaker to deliver up to 105 dB SPL peak (1 kHz at 1m) and 101 dB SPL (1m) for continuous signals. Designed for discreet audio delivery, the ceiling speaker is ideal for indoor environments and can be mounted in cut-outs in tiles or plasterboard.

One can expect to find the ZIPS-C installed in the built environment, supplying informational and multimedia messaging to staff, it is equally suited to of corporate and public sector buildings as it is for back-office applications in more Industrial settings. 

The integrated speaker-as-microphone technology supports two-way communication, ambient listening, automatic volume control, and more – all through the speaker itself.

With IP technology, the system can monitor and manage each speaker individually. By moving the amplifier from a central unit to the speaker itself, the need for a central amplifier and conventional speaker loops is eliminated. This makes the system highly scalable, allowing additional speakers to be easily added.

Although conventional speaker loops are not utilised, the speakers can still be grouped into zones, which can extend across networks or even over the internet.

To ensure maximum reliability, the speaker is equipped with advanced supervision features. It is self-monitoring and capable of detecting faults in the network or speaker electronics. The status is reported to the central unit as well as to third-party management systems via SNMP or Syslog.

The speaker is also auto-discoverable and can receive messages or provide talkback functionality directly to a VMS using ONVIF.

Polar Plot:

General
Codecs G.711, G.722
Frequency range, G.722 Codec 200 Hz – 7000 Hz
Frequency range (speaker driver) 250 - 10000 Hz
Continuous SPL (6dB Crest factor) 101 dBA
Max SPL @ 1kHz/1m 105 dBA
Output Power (Continuous/Peak) 7.5W/30W
IP Rating IP-54, tested according to EN 60529
Dimensions (diameter x depth) 199 x 146 mm
Weight 1.2 kg / 3 lbs
Mounting Hooks / fasteners (included)
Material / Color Steel / RAL 9010 (white)
Boxed Shipping weight 1.85 kg
Boxed Shipping dims (Width x Height x Depth) 230 x 230 x 180 mm
NETWORKING AND PROTOCOLS
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, ONVIF, CCoIP® , NTP
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operation HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE. Remote automatic software upgrade. Centralized monitoring
Advanced supervision functions E.g. network test, tone test, status reports
SIP support RFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info)
DTMF support RFC 2833, 2976 (SIP info)
HARDWARE
Ethernet connector 1 x RJ 45
All other connectors Tool less, spring loaded, vibration proof terminals
General inputs and outputs 1x GPIO; 1x mic/line input
Output 12mA as LED drivers
Change-over relay (NO+COM) 48V nominal, max. 100VDC, 70VAC
Power options PoE
PoE (power over Ethernet) IEEE 802.3af standard, Class 3 (6.49W to 12.95 W)
Max current consumption 0.35 A
Secondary speaker line out 8 Ohm
ENVIRONMENT AND COMPLIANCES
Operating temperature range -40° to 70° C / -40° to 158 ° F
Storage temperature range -40° to 70° C / -40° to 158 ° F
Relative humidity < 95% not condensing
EMC CE and FCC Part 15
OTHER SPECIFICATIONS
System boot time Under 10 seconds
IP address information Speaks IP address after system boot (requires connected loudspeaker)
Country of manufacture Norway
DIN-rail clips Wago 209 (included)
Warranty 2 Years standard warranty, extendible up to total of 5 years (additional fee)

ZIPS-C Dimensions

Date Name Category Size Document
FCC Declaration ZIPS-x Declaration 122.04 KB Login to download
1023320011 ZIPS-C CAD 2D 1.91 MB Login to download
RoHS Declaration ZIPS-x Declaration 97.92 KB Login to download
A100K12275 ZIPS-C Mounting and Installation Manual Manual 1.13 MB Login to download
IECEE CB Test Certificate DK-130293-M1-UL ZIPS-x Certificate 184.19 KB Login to download