DSP-15 EExmN, 25W

Item Number: 2340010002

Ex horn speaker for TFIX-V2 stations, 8 Ohm

IP66

IP67

IEC Ex Intercom

Atex

Ex horn speaker intended for use with TFIX-x-V2 intercom stations.

Installation, Operation and Maintenance Procedures

Remove the lid by four screws, lead the cable through the cable gland, and connect to the terminal with the required tapping.
Every time the back lid is removed, check that the gasket is fitted correctly to the lid before you refit the back lid. Do not use any lubricants on the gasket.
Screw the lid back into place with four screws with a torque of 0,95-1,2 Nm to ensure the IP rating.
To change the position of the loudspeaker, please adjust the standard U-bracket (by loosening/tightening the screws) as required.
Use only IECEx/ATEX certified “Ex eb” cable glands and blanking plugs reflecting the same IP rating and temperature range as the loudspeaker.
Standard model delivered with two M20 Ex-approved plastic blanking plugs.
According to customer requirements, DSP-15EExmN(T) can be supplied with three different bracket systems.
For optimum performance, always use the correct voltage/power and operate within the frequency limits as stated.
Do not open the loudspeaker when energized.

Loudspeaker 20W, 100V, Ex Zone 2

Date	Name	Category	Size	Document
11.09.2023	MD-SDoC-2340010002-IHM-8003-46266-139688.xlsx	Declaration	72.18 KB	Login to download
12.01.2022	A100K11671 DSP 15EExmNT_rev01.zip	CAD 2D	886.94 KB	Login to download
12.01.2022	DSP-15EExmNT DoC.pdf	Certificate	197.75 KB	Download