Exsite fixed camera

EXF2230-52-A4 ExSite Enhanced Series 2 Camera

Item Number: 2310131043

Exproof Camera

  • 2MP
  • 30x Zoom
  • Stainless Steel Fixed Camera
  • 4m armored cable with gland, T5
ONVIF Conformant
Marine 40x40 ico Onboard communication
IP66 IP66
IP67 IP67
Atex
H.264

The EXF2230-52-A4 ExSite Enhanced Series 2 Camera is purpose-built to monitor operations and control processes in hazardous locations with risks of explosion, due to the presence of flammable liquids, gases, or dust. The camera's heavy-duty housing meets stringent explosion-proof and dust ignition-proof requirements while complying with international standards (UL, CSA, ATEX, IECEx, EACEx, KCs, UKEx, INMETRO) and is built with AISI 316L stainless steel construction for exceptional resistance to corrosion, which guarantees efficient video surveillance in offshore marine environments.

EXF2230-52-A4 ExSite Enhanced Series 2 Camera

It provides operators crisp and clear evidence with up to 30X optical zoom with true WDR and low light capabilities for challenging lighting conditions common to hazardous areas. H.264 AND H.265 smart compression technology retains image quality and critical information while reducing and bandwidth requirements to lower cost of ownership. The camera is also ONVIF® COMPLIANT with ONVIF Profile S, T, G and Q.  This compliance allows easy integration with existing ONVIF infrastructures.

The EXF2230-52-A4 ExSite Enhanced Series 2 Camera allows users to see in total darkness or blinding light within hazardous environments. 

 

Image Performance
Image Sensor 1/2.8" progressive scan CMOS
Maximum Resolution (H x V) 1920 (H) × 1212 (V)
Aspect Ratio 16:9
Min Illumination 0.1 lux (F/1.6) in color mode; 0.03 lux F/1.6) in monochrome
Dynamic Range WDR Off: 83dB, WDR On: Up to 120dB
Image Ratio Up to 60 fps
Aspect Ratio (Resolution Scaling) Down to (16:9) 384×216 or (5:4) 320×256
3D Noise Reduction Filter Yes
Lens
Lens F1.6, 4.3-129 mm (30x zoom) remote focus and zoom
Angle of View Horizontal: (16:9) 3.1° - 64.0°, Vertical:(16:9) 1.7° - 38.0°
Zoom Up to 30x
Image Control
Video Compression H.264 and H.265 Pelco Smart Compression, Motion JPEG
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Motion Detection Pixel motion: Selectable sensitivity and threshold. Classified object detection
Electronic Shutter Control Automatic, Manual (1/1 to 1/30,000 sec)
Iris Control P-Iris, Automatic, Open, Closed
Day/Night Control Mechanical IR cut filter. Automatic, Manual
Flicker Control 60 Hz, 50 Hz
White Balance Automatic, Manual
Backlight Compensation On/Off
Privacy Zones Up to 64 zones
Digital Defog Adjustable/Off
Image Control
Video Compression H.264 and H.265 Pelco Smart Compression, Motion JPEG
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Motion Detection Pixel motion: Selectable sensitivity and threshold. Classified object detection
Electronic Shutter Control Automatic, Manual (1/1 to 1/30,000 sec)
Iris Control P-Iris, Automatic, Open, Closed
Day/Night Control Mechanical IR cut filter. Automatic, Manual
Flicker Control 60 Hz, 50 Hz
White Balance Automatic, Manual
Backlight Compensation On/Off
Privacy Zones Up to 64 zones
Digital Defog Adjustable/Off
Network
Network 100BASE-TX
Ports RJ45 connector (CAT5E cabling)
ONVIF ONVIF compliance Profile S, Profile T, and Profile G (www.onvif.org)
Security Password protection, HTTPS encryption, digest authentication, WS authentication, user access log, 802.1x port based authentication
Protocols IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv2, ICMP, DHCP, Zeroconf, ARP, HSTS
Streaming Protocols RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP
Device Management Protocols SNMP v2c, SNMP v3
Mechanical
Dimensions (ØxL) Ø155.5 mm x 264.0 mm; Ø6.12" x 10.4" (dimensions without sunshield)
Weight With 4m cable: 8.5 kg (18.7 lbs); with 10m cable: 12.0 kg (26.5 lbs.)
Construction AISI 316L stainless steel
Finish Electro-polished surface
Wiper Yes
Cable Entry 3/4" NPT
Cable Gland Ex db and tb 3/4" NPT and preinstalled armored cable or with tail cable
Armored Cable Option External diameter: 20.5 mm (0.81") ± 0.5 mm (0.2") Diameter under armature: 16.0 mm (0.63") Color: black RAL 9005 Composition: 3 × 2.5 mm2 (13 AWG), 7 × 0.34 mm2 (22 AWG), 4 × 2 × 0.20 mm2 (24 AWG) (cat. 5E)
Cable Tail Option 3 × 2.5 mm2 (13 AWG), external diameter 8.7 mm (0.34") 7 × 0.34 mm2 (22 AWG), external diameter 6.4 mm (0.25") 4 × 2 × 0.22 mm2 (24 AWG) (cat. 5E), external diameter 7.9 mm (0.31")
Electrical
Local Storage MicroSD/microSDHC/microSDXC slot, up to 2 TB supported - video speed class card required. Class V10 or better recommended.
Power Consumption 53 W 
Input Voltage (Power) VDC: 12 V ± 5% (3.5A), VDC: 24 V ± 5% (2.2A), VAC: 24 V ± 10% (2.2A) at 50/60 Hz
Alarm Inputs 1
Relay Outputs 1 (1A, 30 VAC/60 VDC max)
Audio Input and Output None
Environmental
Operating Temperature -50 °C to +60 °C (-58 °F to 140 °F)
Storage Temperature -40 °C to +55 °C (-40 °F to 131 °F)
Humidity 10% - 95% non-condensing
Cold Start Up to 2 hour startup delay at temperature lower than -10 °C (14 °F)
Certifications
Certifications/Directives cULus, CE, UKCA, ROHS, RCM
Safety UL/CSA 62368-1, EN/IEC 62368-1
Hazardous ATEX (EN IEC 60079-0, EN 60079-1, EN 60079-31), IECEx (IEC 60079-0, IEC 60079-1, IEC 60079-31), EAC EX (TR CU 012/2011), INMETRO (ABNT NBR IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-31), UK Ex (EN IEC 60079-0, EN 60079-1, EN 60079-31), KCs (Employment and labor department 2016-54), cable tail versions, ETL listed for USA (UL 60079-0, UL 60079-1, UL 60079-31) cable tail versions, ETL listed for Canada (CAN/CSA-C22.2 NO. 60079-0, CAN/CSA-C22.2 NO. 60079-1, CAN/ CSA-C22.2 NO. 60079-31) cable tail versions
Environmental and Performance EN/IEC 60529: IP66, IP67, IP68, IP69 EN 60068-2-52: salt spray UL50E: 4X, 6P
Electromagnetic Emissions FCC Part 15 Subpart B Class A, IC ICES-003 Class A, EN 55032 Class A, EN 61000-6-3
Electromagnetic Immunity EN 50130-4
Vibration Test EN 50130-5, EN 60068-2-6
Warranty 3-year limited warranty. 5-year extended warranty is available.
Supported Analytics Events
Objects in Area The event is triggered when the selected object type moves into the region of interest.
Object Loitering The event is triggered when the selected object type moves into the region of interest, then stays for an extended amount of time.
Objects Crossing Beam The event is triggered when the specified number of objects have crossed the directional beam that is configured over the camera’s field of view. The beam can be unidirectional or bidirectional.
Object Appears or Enters Area The event is triggered by each object that enters the region of interest and can also be used to count objects.
Object Not Present in Area The event is triggered when no objects are present in the region of interest.
Objects Enter Area The event is triggered when the specified number of objects have entered the region of interest.
Objects Leave Area The event is triggered when the specified number of objects have left the region of interest.
Object Stops in Area The event is triggered when an object moves into a region of interest and then stops moving for the specified threshold time.
Direction Violated The event is triggered when an object moves in the prohibited direction of travel.
Sabotage Detection The event is triggered when the scene unexpectedly changes.

Exsite Camera Dim Draw

 

Date Name Category Size Document
2023_11_Declaration Declaration 822.04 KB Login to download
PQAN - DEMKO 17 ATEX Q5889 Rev. 4 Certificate 226.47 KB Login to download
IECEx_ITS_15.0030X_004 Certificate 499.84 KB Login to download
MD-SDoC-2310131043-IHM-8003-57862-177326 Declaration 70.9 KB Login to download