SAP03 Station Announcement Point with 10 Button

SAP03

Item Number: 1200420030

Wall Mount Paging Microphone with 10 buttons - Lockable Enclosure

  • Fist based paging microphone
  • Live, store + forward & pre-recorded message triggers
  • 10 selection buttons
  • Wall mounted
  • Lockable and vandal resistant enclosure
  • IP65 enclosure suitable for exterior installation
  • Flexible connectivity supporting both IP or analogue / serial 
     
Public Address
Commercial Audio

Zenitel’s Station Announcement Point (SAP03) paging microphone is purpose-built for both interior or exterior public areas, such as train station platforms, to enable local announcements. It is housed in a robust, IP65-rated, vandal resistant, wall-mounted, lockable enclosure and integrates seamlessly with Zenitel’s PAVA Audio Routers.

The microphone features a flexible fist microphone with an integrated Push-to-Talk (PTT) button and a 10-button panel. The buttons can be used to select zones for live announcements or to trigger pre-configured ‘recorded messages’. Each button is equipped with three LEDs that indicate the following depending on the systems configuration, when a button (zone) is selected, when a zone is in use (busy), when a VA announcement is in progress, or if a fault condition is
detected.

To ensure system integrity, the microphone generates a low-frequency surveillance tone to continuously monitor the audio connection to the Audio Router. The microphone capsule is monitored by injecting and analyzing a signal, ensuring any open or short circuits in the capsule or associated wiring trigger a fault indication. Additionally, the Audio Router monitors the data connection and reports any local alarms.

INTEGRA-03-PRO Integrated Power Amplifier, DSP and Audio Matrix (Dante Enabled)

INTEGRA-PRO-03

PAVA Wall Mount System (3 amp channels pre installed) - Dante® Enabled

INTEGRA-05-PRO_900px

INTEGRA-PRO-05

PAVA Wall Mount System (5 amp channels pre installed) - Dante® Enabled

INTEGRA-05-PRO_900px

INTEGRA-PRO-07

PAVA Wall Mount System (7 amp channels pre installed) - Dante® Enabled

INTEGRA-10-PRO

INTEGRA-PRO-10

PAVA Wall Mount System (10 amp channels pre installed) - Dante® Enabled

INTEGRA-05 Integrated Power Amplifier, DSP and Audio Matrix

INTEGRA-05

PAVA Wall Mount System (5 amp channels pre installed)

INTEGRA-07 Integrated Power Amplifier, DSP and Audio Matrix

INTEGRA-07

PAVA Wall Mount System (7 amp channels pre installed)

INTEGRA-10 Integrated Power Amplifier, DSP and Audio Matrix

INTEGRA-10

PAVA Wall Mount System (10 amp channels pre installed)

Zenitel VAIA

VAIA

4 Channel Public Address and Voice Alarm Amplifier and Controller - EN 54

Zenitel VAIA-AC

VAIA-AC

4 Channel Public Address Amplifier and Controller - AC Version

Zenitel VAIA-48V

VAIA-48V

4 Channel Public Address Amplifier and Controller - 48V DC Version

SAP02 Station Announcement Point

SAP02

Wall Mount Paging Microphone with PTT - Lockable Enclosure

Date Name Category Size Document
PAVA - SAP03 - Datasheet - Version 3 ASL Datasheet 373.25 KB Download
PAVA - Complete PAVA Range - Bentley MicroStation Cells BIM 69.29 MB Login to download
PAVA - SAP03 - BIM REVIT - 24/10/16 BIM 441.22 KB Login to download
PAVA - SAP03 - User Manual - Version 2 ASL User Manuals 1.29 MB Login to download
PAVA - SAP03 - Installation Manual - Version 2 ASL Installation Guides 1.02 MB Login to download