1008041200 IPVRS-1

Vandal Resistant Substation - IPVRS-1

Item Number: 1008041200

Vandal Resistant IP Intercom

  • Powerful audio technology including high sound pressure, automatic volume gain control, and active noise echo canceling
  • Vandal Resistant Design with IK08
  • IP55 - Dirt, dust and water resistant
  • Designed in stainless steel (AISI 316L) to withstand corrosion
  • 2 Relay outputs for remote control, e.g. doors, signal lamps and gates
  • Can operate in SIP, IC-EDGE and ICX-AlphaCom mode
IK07 IK08

The Vandal Resistant Substation IPVRS-1 is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.

See also: additional documentation on wiki.zenitel.com

AUDIO
Noise cancelling - suppression of musical noise YES
Noise cancelling - suppression of static noise YES
Noise cancelling - suppression of rapidly changing noise YES
Codecs G.711, G.722, G.729
Frequency range, G.722 Codec 200 Hz to 7000 Hz
Audio technology Modes: Full open duplex, switched open duplex
Adaptive jitter filter
Local tone generator
Audio mixing - 3 channels
Sound level detection (scream alarm)
Automatic gain control (microphone)
Automatic volume adjustment
10 W class D
Electret microphone
8 ohm
HARDWARE
Ethernet connector 2 x RJ45
All other connectors Tool less, spring loaded, vibration proof terminals
General inputs and outputs 6 (configurable), 12mA as LED drivers
Change-over relays (NO+NC+COM) 2 relays, max: 60VDC, 2A, 60W
Power options PoE and or external power supply
PoE (power over Ethernet) IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
External power supply 24 VDC (16 to 48 V)
Power consumption Idle 1.8W, max 13W (depending on volume)
Audio line out / induction loop signal 600 ohm
Construction
Dimensions (HxWxD) 180 x 92 x 46 mm
Weight 0.8 kg
Protection Vandal resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws
Mounting Flush mount in 50 mm deep back box
Frontplate material AISI 316L
NETWORKING AND PROTOCOLS
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, Vingtor-Stentofon CCoIP® , NTP
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operation HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE, Remote automatic software upgrade, Centralized monitoring
Advanced supervision functions E.g. network test, tone test, status reports
SIP support RFC 3261 (SIP base standard)
RFC 3515 (SIP refer)
RFC 2976 (SIP info)
DTMF support RFC 2833, 2976 (SIP info)
ENVIRONMENT AND COMPLIANCES
Operating temperature range -40° to 70° C / -40° to 158 ° F
Storage temperature range -40° to 70° C / -40° to 158 ° F
Relative humidity < 95% not condensing
Ingress protection With mounting box1008098000 (on wall): IP-44, With mounting box 1008098100 (flush mount): IP-55
Impact protection IK 8
EMC CE and FCC Part 15
Other Specifications
Warranty 2 Years standard warranty, extendible up to total of 5 years (additional fee)

IPVRS-1 Dimensions

Date Name Category Size Document
16.02.2024 FCC Declaration IPVRS-1 Declaration 114.07 KB Login to download
16.02.2024 CE Declaration IPVRS-1 Declaration 135.44 KB Login to download
15.02.2024 1008041200 IPVRS-1 CAD 2D 647.36 KB Login to download
19.10.2023 RoHS Declaration IPVRS-1 Declaration 90.38 KB Download
24.09.2020 A100K11936 Tamper Switch for IP Substation TKIE Installation Guide Manual 450.82 KB Download